|
|
Filter By
...more
Category
...more
|
See similar Items
CHANDLER 16' PULL LITTER SPREADER MECHANICAL
|
Details |
Item |
70565 |
Retail Unit |
Each |
Mfg Name |
BBI |
Mfg Item ID |
TPMP453416 |
UPC Code |
|
|
|
|
|
|
Features of the BBI Endurance Pull Type Mechanical Litter,
Shavings and Organics Spinner Spreader
-
Extensive use of UHMW reduces corrosion issues and extends the
life of the spreader.• UHMW Bearing Back keeps bearings clean resulting in
longer bearing life and fewer failures.
-
Optional UHMW Poly Floor lasts the lifetime of the spreader.
The drag coefficient is less than steel. Floor chain, motors, and gear cases
last longer.
-
3/8” Fin - 33% thicker than traditional designs.
-
Dual Rack and Pinion gate prevents jams.
-
Flotation tires minimize compaction.
-
Innovative Spinner Motor design eliminates motor failure
at the pressure seal.
-
Heavy duty gear case on mechanical spreaders.
-
Fuel and time to apply is reduced by 50%.
-
Lower Maintenance Expense.
-
Lowest "Cost In Use" Spreader on the
market.
Terminology
(TPMP) = Tandem Axle, Pull Type, Mechanical Powered (4534) = 45 Degree
Sides, 34" Conveyor Carbon Steel standard - Other Options available
Body Type Options
Standard Profile 51.5” Hopper
Height from rails to top, 20 cu ft / linear foot struck, 88” wide.
High Profile 57.5” Hopper
Height from rails to top, 23.5 cu ft / linear foot struck, 88” wide.
Low Profile 45.5” Hopper Height
from rails to top, 16 cu ft / linear foot struck, 88” wide.
Model Specs
** TPMP 4534 UNIT POWER SOURCE: The Tractor PTO (Power Take Off)
powers the spreader (specify 540 or 1000 RPM) Heavy-duty, shielded PTO
shaft supplied. Mechanical Gearcase transfers power from the PTO to the
spinners and conveyor. ** SUSPENSION AND WHEELS: Standard suspension
includes 7,000 lb Henshen "Torsion-Flex" tandem axles with 12.5L x 15
Implement Tires with 6-Bolt Hub. Other suspension and tire options are
available. ** CONVEYOR: This 34" wide conveyor moves material to the
spinners. The chain is a heavy duty, self-cleaning pintle-type chain
connected by wide flat bars (3/8" x 1 1/4 x 29") welded on every 5th link of
chain (11 1/4" centers on 667X). ** CONVEYOR DRIVE: This mechanical
unit is a specially designed 50:1 gear case with a 2" diameter output
shaft. Two oil seals at each end of the worm shaft prevent oil
leaks. The split case housing design requiresd no shims at any
locations. ** State of the Art - ELECTROSTATIC PAINT: Carbon unit is
totally primed with a rust-inhibiting alkyd primer and then top-coated with high
gloss enamel. Stainless unit includes all mild carbon steel parts primed
and painted. Color options include red, blue, yellow, black or
green. Some custom colors are available. ** SPINNERS AND SPINNER
DRIVE: TPMP has 24" spinners with 4 blades in the mechanical
system. Hydraulic Plug to Tractor Spinners are an
option.
|
|
|